|
Asymmetric multiprocessing (AMP) was a software stopgap for handling multiple CPUs before symmetric multiprocessing (SMP) was available. It has also been used to provide less expensive options on systems where SMP was available. In an asymmetric multiprocessing system, not all CPUs are treated equally; for example, a system might only allow (either at the hardware or operating system level) one CPU to execute operating system code or might only allow one CPU to perform I/O operations. Other AMP systems would allow any CPU to execute operating system code and perform I/O operations, so that they were symmetric with regard to processor roles, but attached some or all peripherals to particular CPUs, so that they were asymmetric with regard to peripheral attachment. Multiprocessing is the use of more than one CPU in a computer system. The CPU is the arithmetic and logic engine that executes user applications; an I/O interface such as a GPU, even if it is implemented using an embedded processor, does not constitute a CPU because it does not run the user's application program. With multiple CPUs, more than one set of program instructions can be executed at the same time. All of the CPUs have the same user-mode instruction set, so a running job can be rescheduled from one CPU to another.〔(Introduction to Multiprocessing ): distinguishes “symmetric” from “master/slave”〕 ==Background and history== For the room-size computers of the 1960s and 1970s, a cost-effective way to increase compute power was to add a second CPU. Since these computers were already close to the fastest available (near the peak of the price:performance ratio), two standard-speed CPUs were much less expensive than a CPU that ran twice as fast. Also, adding a second CPU was less expensive than a second complete computer, which would need its own peripherals, thus requiring much more floor space and an increased operations staff. Notable early offerings by computer manufacturers were the Burroughs B5000, the DECsystem-1055, and the IBM System/360 model 65MP. There were also dual-CPU machines built at universities.〔(Early Computers at Stanford: the dual processor computer at the AI lab )〕 The problem with adding a second CPU to a computer system was that the operating system had been developed for single-CPU systems, and extending it to handle multiple CPUs efficiently and reliably took a long time. To fill the gap, operating systems intended for single CPUs were initially extended to provide minimal support for a second CPU. In this minimal support, the operating system ran on the “boot” processor, with the other only allowed to run user programs. In the case of the Burroughs B5000, the second processor's hardware was not capable of running "control state" code.〔(【引用サイトリンク】title=Operational Characteristics of the Processors for the Burroughs B5000 )〕 Other systems allowed the operating system to run on all processors, but either attached all the peripherals to one processor or attached particular peripherals to particular processors. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Asymmetric multiprocessing」の詳細全文を読む スポンサード リンク
|